Premium Pool Pump Cover | Wall Mounted

This Pool Pump Cover is a wall mounted version.  If you are looking for a Free Standing Pool Pump Cover that does not attach to a wall or fence, with a back, then please click HERE.

Dimensions online aren't quite right for your equipment?  Fill out our custom enclosure form HERE.

Features:

• Expertly manufactured aluminium construction - no rot or rust!
  
  
• Lockable Front Gate with high quality D&D Technologies MAGNALATCH ® side pull gate latch
  
  
• Gas Struts on lid for easy access
  
  
• Complete welded panels - no screwing together individual slats!
  
  
• Powder Coated Finish - Available in the full range of Colorbond Colours - with custom colours available
  
  
• Pre-assembled in factory for perfect alignment during installation - by DIY or contactor
  
  
• Flat Pack Design for easy shipping
  
  

Here's what makes our enclosures the best!

1. Expertly built, simple assembly

Our pool pump sheds are expertly manufactured by our team of professional aluminium fabricators. Our flat pack design enables us to ship you your high quality enclosure all over Australia! Built as complete panel sections that are fully welded and only require them to be screwed together to form a strong, rigid enclosure. 

Other suppliers of Pool Pump Covers offer units that require the end user to insert all of the slats and spacers, screw them all together and essentially build it from scratch. Not the case with ours! Assembly is simple and can be completed with minimal tools and basic experience. Simply follow our detailed instructions provided in our hardware pack with all the hardware, struts, latches and fasteners included as part of your order!  

All of our enclosures are meticulously welded, blended and fully assembled at our factory prior to powder coating, so you can have total confidence that your new unit will fit together perfectly!

2. High Quality Finishing and Fittings

Our Integral CNC built Pool Pump Enclosures are provided with only the highest quality struts, hinges, latches and fasteners.

We exclusively use durable D&D Technology Fittings such as; MAGNALATCH^® Side Pull Lockable Latches and KwikFit™ Hinges - no cheap and nasty mild steel hinges!

Stainless spring latches, stainless screws, high quality gas struts and colour matched wall brackets are all included in the package.

We offer the full range of Colorbond colours on the website with other colours available on request!

Construction:

• 50mm Aluminium Frame
  
• 65mm Aluminium Slats
  
• 10mm Gap Spacing - Unless otherwise requested
• Stainless Fasteners
  
• D&D Side Pull Lockable Magnalatch and Kwikfit Hinges
  
• Powder Coated Finish
  
• Complete Panels welded and blended

More details below:

Our pool pump enclosures will add value to your property and further enhance the look of your entertainment area. Colour-matched powder-coated aluminium, welded for strength and available in the full range of Colorbond colours as well as custom colours to suit your theme. 

Our aluminium pool filter covers are custom made at our factory on the Sunshine Coast. We use the best quality hardware and our pool pump enclosures are flat packed, majority assembled and delivered throughout Australia.

Simple DIY installation.  Only requires basic tools and general handyman skills to assemble.

IMPORTANT INFORMATION ABOUT DELIVERY CLICK HERE

Assembly is simple:

1. The side panels feature a welded frame and are one piece.

2. A front and rear top rail fixes to each side panel. 

3. The doors are also fully welded and one piece.  These are mounted to the side panels.

4. Hinge holes are pre drilled so simply screw the hinges in position.

5. The lid is one piece, fully welded and ready to attach to the top (again hinge holes are pre-drilled). 

6. All that is required now is to bolt the feet plates to the concrete slab or screw to a timber base or deck.  

If you are looking for a custom made pool equipment enclosure cover then please fill out our custom enclosure quote form HERE.

Delivery:

We specialise in supplying the South-East QLD area, such as Gympie, the Sunshine Coast and Noosa, Brisbane and the Gold Coast. We also supply Northern NSW, Tweed Heads, Newcastle, Sydney Metro, Canberra and Melbourne Metro. We deliver Australia wide - fixed rates are calculated based on state and destination. 

All of our units are shrink wrapped, bubble wrapped and cardboard protected for safe transit. 

We'll notify your prior to shipping so you'll know exactly when to expect your order.

Measuring up and Sizing:

Height: An important note when measuring height for your new enclosure - Measurements on our website are external measurements.  So, as a guide, a 1200 high enclosure will have clearance at the back of 1150mm internal (50 mm frame) and 1135mm clearance at the front (15mm fall on the lid for drainage plus 50mm frame).  To be sure your new enclosure will clear your pump equipment, we suggest measuring the height of your equipment and adding 100mm. 

Width: Be sure to allow for the internal 50mm frame on each side.  So, an enclosure measuring 2000mm wide will have an internal measurement of 1900mm.

Depth: Allow for the front gate frame @ 50mm.  So, again as an example an enclosure with an external measurement of 1000mm will have an internal measurement of 950mm. 

We manufacture and distribute pool pump enclosure covers throughout the Sunshine Coast, Brisbane, the Gold Coast, Queensland, Tweed Coast, Northern NSW, Sydney Metro, Victoria Metro and all of Australia. Our typical manufacturing time is around 2 ~ 3 weeks and powder-coating time is approximately 2 weeks. Our typical manufacturing time is around 4 weeks and powder-coating time is approximately 2 weeks. Allow approx 6 weeks for completion.

We can fabricate aluminium enclosures for any size or quantity. Contact us today for a quote!

Integral CNC is a family owned fabrication business in Forest Glen, QLD. We are dedicated to providing the highest quality Australian made products we can possibly manufacture. By purchasing an aluminium enclosure from us, you are supporting a local business who is committed to sourcing as much or their materials and components from other local businesses. This includes the supply of our aluminium, our gate hardware and hinges, our stainless fasteners and our gas struts. We thank you for your support and for supporting Australian manufacturing.